Skip to Content

Rotor Error Troubleshooting

Rotor Error Troubleshooting

The motor that rotates the head isn’t functioning properly.

Common causes:

  • Caked-on debris either inside or outside the riser

  • Rotor motor failure (can’t reach position)

Try this first:

  1. Remove the nozzle & filter.

  2. Start manual calibration to flush the riser.

    • Zones > select that zone > gear icon > calibrate > manual calibrate

    • Let water bubble through the head for 60-90 seconds.

    • Cancel the calibration.

  3. Loosen soil around rotator cap*.

    • Only applies to sprinkler 3 or newer heads.

  4. Re-assemble the head.

  5. Test the head with another quick run.

Alimentato da MavenoidSitemap
ProdottoPreventivoInstallatoriGaranziaIrrigreen System 2 PartsInstant Online QuoteBook a Virtual Design Appointment
Chi siamoInformativa sulla privacyTermini di servizio