Skip to Content

Calibration Error Troubleshooting

Calibration Error Troubleshooting

Common causes:

  • Clogged filter or nozzle blocking flow (often from unflushed FlexPipe/Swing Joint)

  • Pressure too high or too low

  • Flow meter misconfigured or failing

  • Another active error interfering with calibration

  • Head requires manual calibration (no pressure sensor)

What to do:

  • Check that pressure is constant between 40–80 PSI

  • Remove the nozzle and clean the filter

  • Reinstall and run calibration again

If you have a flow meter, try turning it off, then back on after calibration.

If calibration still fails, check for other errors on the Zone screen or switch to manual calibration if needed.

Alimentato da MavenoidSitemap
ProdottoPreventivoInstallatoriGaranziaIrrigreen System 2 PartsInstant Online QuoteBook a Virtual Design Appointment
Chi siamoInformativa sulla privacyTermini di servizio