Seed Mode

Seed mode can be used temporarily to water zones where grass seed has been put down. With seed mode enabled, sprinkler heads will rotate 5x faster so as to not displace the seed as much as possible. With seed mode enabled, each revolution will put down 0.01" of water but will still run in 0.05" increments in schedules. Enabling this setting will disable Double Coverage, a setting that would run additional revolutions at 10% reduced distance for lengths above 10' at the end of a run.

To enable seed mode, tap the zone you want to enable that setting on, tap the cogwheel, and then enable seed mode at the bottom.

Seed mode will default to stay on for 30 days when enabled. If you wish to change that duration, do so by adjusting the end date. After the end date, the sprinkler head will disable seed mode & return to normal operation.