Skip to Content
Sprinkler 3FlexPipes, Swing Joints, and Sprinkler 3
Try this solution

FlexPipes, Swing Joints, and Sprinkler 3

You can use your existing FlexPipe with Sprinkler 3. We recommend using our new and improved swing joint, but a homemade adapter is simple!

  1. Add Teflon tape FlexPipe ¾” fitting

  2. Add Teflon tape to 1” male end of Sprinkler 3

  3. Connect threaded fitting to FlexPipe and to Sprinkler 3 (use wrench to tighten)

To use the FlexPipe AND the swing joint, follow these steps!

  1. Add PVC 1” to ¾” Threaded union

  2. Add Teflon tape to Swing Joint and FlexPipe threads (both sides of union)

  3. Connect FlexPipe and Swing joint to union (use wrench to tighten)

  4. Connect Swing Joint to Sprinkler 3 (no Teflon Tape, no tools)

Powered by MavenoidSitemap
ProductGet QuoteInstallersWarrantyLogin
SocialInstagramTiktokFacebookLinkedinTwitterYoutube
Contact us5250 W 73rd St Suite I Edina, MN 55439(855) AUTO-H20(855) 288-6426[email protected][email protected]
About UsInvestorsPrivacy PolicyTerms of Service